Page 1
INSTRUCTION MANUAL Rotary Hammer HR4002 008056 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENG102-3 EC Declaration of Conformity Noise Makita Corporation responsible The typical A-weighted noise level determined according manufacturer declare that the following Makita to EN60745: machine(s): Sound pressure level (L ) : 92 dB(A) Designation of Machine: Sound power level (L...
Page 3
Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock.
GEB007-7 17. If devices are provided for the connection of dust extraction collection facilities, ROTARY HAMMER SAFETY ensure these are connected and properly used. WARNINGS Use of dust collection can reduce dust-related hazards. Wear ear protectors. Exposure to noise can Power tool use and care cause hearing loss.
Hammering only WARNING: DO NOT let comfort or familiarity with product 1. Change lever 2. Pointer (gained from repeated use) replace strict adherence 3. Lock button to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
Page 6
Installing or removing the bit CAUTION: Use the side handle only when chipping, scaling or • 1. Bit shank demolishing. Do not use it when drilling in concrete, 2. Bit grease masonry, etc. The tool cannot be held properly with this side handle when drilling.
Bit angle (when chipping, scaling or body. The depth gauge cannot be used at the position demolishing) • where the depth gauge strikes against the gear 1. Pointer housing/motor housing. 2. Change lever 3. Lock button OPERATION Hammer drilling operation 008063 The bit can be secured at 12 different angles.
Authorized Service Centers only. This tool requires no hourly or daily lubrication because it has a grease-packed lubrication system. It should be relubricated regularly. Send the complete tool to Makita Authorized or Factory Service Center for this lubrication service. To maintain product SAFETY and RELIABILITY, repairs,...
Page 12
Makita Corporation Anjo, Aichi, Japan 884714A223...