Av Mode Selection; Opc (Optical Picture Control) Setting; Opc - Sharp AQUOS LC-42G7H Operation Manual

Basic adjustment settings

AV MODE selection

AV MODE gives you 7 viewing options to choose from to
best match the system environment, which can vary due to
factors like room-brightness, type of programme watched
or the type of image input from external equipment.
Using AV MODE on the remote control unit
Press AV MODE.
1
• Present AV MODE displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
When the input source is TV, INPUT1, 2 or 3 terminals (Example)
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: DYNAMIC (Fixed)
When the input source is INPUT4, 5 or 6 terminals (Example)
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: DYNAMIC (Fixed)
Selected item
STANDARD For a highly defi ned image in a normally
bright room
MOVIE For a movie
GAME Lowers image brightness for easier viewing.
For PC. (Available only when inputting an
PC
HDMI or DVI signal.)
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC Changes the image and sound settings to
(Fixed) the factory preset values. No adjustments
are allowed.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for ANALOGUE TV
input and DYNAMIC for INPUT3.)
26
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER [TV]
AV MODE: MOVIE
AV MODE: GAME
AV MODE: PC
AV MODE: USER [ ]
Description
OPC (Optical Picture Control)
setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Using OPC on the remote control unit
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "OPC".
3
Press c / d to select the desired item, and
4
then press ENTER.
Selected item
Off The brightness is fi xed at the value set in
"Backlight" (See page 27).
On Automatically adjusts
On: Display Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
Description