Table of Contents
Advertisement
TO PROGRAM PUNCH THROUGH FUNCTIONS
You can use audio receiver volume control in a different mode (e.g. Audio receiver Volume Up
and Volume Down and Mute in Satellite mode) using a volume punch through feature. You
can also have four VCR (or DVD) transport buttons, Play, Stop, Fast Forward and Rewind,
operate in another mode such as in Satellite, Cable and Audio modes. You can also set
CHANNEL for punch through.
PROGRAMMING:
1 Press PUNCH THROUGH in the LCD screen in 2. SYSTEMS & OPTIONS mode.
2 Press VOLUME UP button for Volume Punch Through or press the PLAY button for
Transport Punch Through. or CHANNEL up button for Channel Punch Through.
3 Select the device you wish to punch through to (1st device).
4 Select the device you wish to punch through from (2nd device).
5 Repeat from Step 2 to program Punch Through to other devices.
Once you complete the Punch Through programming and wish to exit, press both the MAIN
and PAGE buttons simultaneously. This will take you to the setting mode. Move the cursor to
8. TO EXIT in the setting mode and press down the joystick to exit or simply press the MAIN
button to exit to main menu.
TO ERASE PUNCH THROUGH FUNCTIONS:
Press the same device button in the PUNCH THROUGH TO? and PUNCH THROUGH FROM?
during the Punch Through programming.
SYSTEM OPERATIONS AND SET UP
ENG
21
Advertisement
Table of Contents
