Erasing The Learned Buttons - NAD HTR-5 Instruction Manual

PROGRAMMING THE REMOTE CONTROL
TO ERASE THE LEARNED BUTTONS
TO ERASE A SINGLE BUTTON:
1 Go to the program setting mode by pressing both the MAIN and PAGE buttons
simultaneously for five seconds.
2 Move the cursor to 4. Learning with the joystick and then push the joystick down to
enter the learning mode.
3 Move the cursor to COMMON BUTTON and select the device that contains the
functional button you wish to erase. If you wish to erase the function in the device
button, move the cursor to DEVICE BUTTON.
4 Press the functional button or device button you wish to erase for three seconds or
more and it will flash "ERASED". Repeat this step for other buttons you wish to erase.
5 Once you completed erasing and wish to exit from this mode, press the MAIN button
ENG
to go back to the main page of the learning mode. Exit from the Main page by pressing
both the MAIN and PAGE buttons simultaneously.
6 You will now be in the setting mode once again. Move the cursor to 8. TO EXIT and
press down the joystick or simply press the MAIN button to exit to the main menu.
TO ERASE ALL THE LEARNED COMMANDS IN A SINGLE DEVICE:
1 Go to the program setting mode by pressing both the MAIN and PAGE buttons
simultaneously for five seconds.
2 Move the cursor to 4. Learning with the joystick and then push the joystick down to
enter the learning mode.
16