Replacement Of Regulator Ic (Ic2010) - Panasonic SA-AKX90PH Service Manual

Step 10 Detach 25P FFC at the connector (CN2002) on Main
P.C.B..
Step 11 Remove Main P.C.B..
Caution: During assembling, ensure that earth plate is
bended flat against the Main P.C.B. properly when inserted
to locators.
9.13. Replacement of Regulator IC
(IC2010)
• Refer to "Disassembly of Main P.C.B.".
9.13.1. Disassembly
(IC2010)
Step 1 Desolder pins of the Regulator IC (IC2010) on the sol-
der side of Main P.C.B..
Step 2 Remove 1 screw.
Step 3 Remove the Regulator IC (IC2010) from the Main
P.C.B..
Caution: Avoid touching the Small Heatsink due to its high
temperature after prolong use. Touching it may lead to
injuries.
42
of Regulator IC