Goldmund Mimesis 16.8 User Manual page 9

1 SETTING UP THE MIMESIS 16.8 (Ctd.)
1.5 FIRST INSTALLATION & CONNECTIONS (Ctd.)
On Digital outputs, the signals are depending on the configuration loaded in the acoustic
processor.
The Input 6 (USB) is used to link the Mimesis 16.8 to an external computer in order to play
music (PCM 96kHz/24bit maximum). The Input Control (USB) is used to update the Mimesis
16.8 software with the Goldmund Universal Configurator. All drivers needed are included in
the configuration file provided in the Configurator.
Note: If the display indicates "CF" & "--", as shown on the picture below, it means that the
Mimesis 16.8 does not have a configuration loaded. Please contact your authorized
Goldmund retailer to assist you to set up your unit.
To play audio files from a computer to a Mimesis 16.8:
1- Connect the USB cable from the computer to the Mimesis 16.8 and power them both ON.
2- Select the audio input 6 on the Mimesis 16.8 to listen to USB audio.
When all input sources are connected, connect the digital output RCA jacks to the Digital
input of the active speakers or the digital input of your amplifier.
GOLDMUND MIMESIS 16.8 - UNIVERSAL ACCOUSTIC PROCESSOR - 8