Installing The Outdoor Unit - York EKKC-18 DS Installation Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

Precautions

1. Incorrect tightening can cause problems,

as shown in Fig. 13.

��

Fig. 13

2. If any clearance is left between the ceil-

ing and the front panel after tightening,

readjust the height of the indoor unit, as

shown in Fig. 14.

��

It is possible to adjust the height of the indoor unit by

tightening at the corners of the front panel if the indoor

unit is level. This does not affect the connections.

* After fastening the unit, make sure there is no

clearance between the unit and the ceiling.

Fig. 14

3. Connecting the front panel.

��

(6) Fasten the 2 front panel connectors to the unit.

Selecting location for the out-

door unit

- Select a location that satisfies the follow-

ing conditions, and those required by the

client.

- Select a location where the air and noise

generated by the unit do not bother the

neighbours.

- Select a very well ventilated location.

- Neither air intake nor discharge can be

obstructed.

- Install in a location that can withstand the

weight and vibration of the unit.

- There can be no danger of inflammable

or corrosive gases.

- Make sure the installation follows the dis-

tances recommended in the installation

dimensions diagram.