Network Camera Mounting; Tripod Mounting; Wall Mounting - Panasonic KX-HCM230 Getting Started

PSQX2811XB.book 7 ページ ２００３年５月３０日 金曜日 午後４時３８分

Network Camera Mounting

Four mounting methods are shown in the following figures. Please confirm the top and bottom of the
Network Camera when mounting.
Flexible Stand Mounting
1)
Attach the Network Camera by screwing the threaded
mount into the tripod mounting hole.
2)
Turn the grip to fix the Flexible Stand firmly.
Tripod
mounting
hole

Wall Mounting

1)
Mount the Flexible Stand firmly to the wall or the beam using the three screws (accessories). Please set the Flexible Stand
165 mm away from the ceiling.
• Please use proper screws fit for the material of the wall.
2)
Attach the Network Camera by screwing the threaded mount into the tripod mounting hole. Mounting
hole on the rear side is also available.
3)
Adjust the position of the Network Camera and secure the Flexible Stand firmly.
4)
Roll up the cables and Flexible Stand with the Self Bonding tape (accessories).
1)
165 mm
3)

Tripod Mounting

Attach the Network Camera to the tripod by using the tripod bolt.
1)
2)
2)
Caulk around Flexible
Stand if you need
4)
Self Bonding tape
Tripod
mounting
hole
Please waterproof
the rest of the cable.
7