HP 27SV User Manual page 18

ENWW
• Power Button:
Press to switch the monitor on or off.
• Power Indicator:
Blue — Power On mode.
Orange — Standby mode.
LED off — Off mode.
• MENU / ENTER:
Activate OSD menu or function adjust confirm or Exit OSD menu when in
Brightness/Contrast OSD status.
• + / Volume(V272):
Activate the volume control when the OSD is OFF, Press + or - to adjust the setting
when OSD is ON.
• + / Volume & audio source(27sv):
When the OSD is closed, press the button will be Audio Hot-Key Function, and press
MENU key to move the orange cursor to Audio Source, then it can be adjust.
• - / ECO:
Activate the ECO function when the OSD is OFF, navigate through adjustment icons
when OSD is ON, or adjust a function when function is activated.
• Auto Config. button / Exit:
1. When OSD menu is off, press and hold to activate the Auto Adjustment function
(only for VGA source). The Auto Adjustment function is used to optimize the
H.Pos, V.Pos, Clock and Phase.
2. When OSD menu is on, press to exit the OSD menu.
3. When the OSD is closed, Press Auto/Source button continuously about 3 second
to popup Source window.
OSD Lock Function: To lock the OSD, press and hold the MENU button while the
monitor is off and then press power button to turn the monitor on. To un-lock the OSD,
press and hold the MENU button while the monitor is off and then press power button
to turn the monitor on.
NOTES
• Do not install the monitor in a location near heat sources such as radiators or air
ducts, or in a place subject to direct sunlight, or excessive dust or mechanical
vibration or shock.
• Save the original shipping carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at
the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly dampened with a mild detergent
solution. Never use strong solvents such as thinner, benzene, or abrasive
cleaners, since these will damage the cabinet. As a safety precaution, always
unplug the monitor before cleaning it.
• Do not scratch the screen with hard things, it may cause permanent damage.
• Do not leak liquid into monitor which will result in the damage of component.
13
Front-Panel Controls