Taking A Picture In A Dark Place; Using The Flash Popup Button; Setting The Flash Option - Samsung NX10 Quick Start Manual

Taking a picture in a dark place

The function can be set directly by pressing [Fn] in the shooting mode.
Using the flash popup button
The flash operates when the built-in flash is opened by using the
flash button. When the flash is closed, it will not burst out the light
and the , , and
and flash light.
1
In Shooting mode, press [ ].
2
Align your subject in the frame and half-press
[Shutter] to focus.
3
Press [Shutter] to take a photo.
popped out by using the 'Flash' button, the bursting
function is not supported when the flash option of
menu is set to Off.
modes support automatic popup
Flash button
Setting the flash option
If a picture is taken in a dark place, the picture may appear to be dark
since the light source is not sufficient. Press [
1
In Shooting mode, press [MENU].
2
) → Flash → an option.
Select Shooting 2 (
2
The flash light doesn't operate.
Off
The amount of flash light is adjusted automatically
Smart Flash according to the exposure in the surrounding
SMART
environment.
The flash light operates automatically in the dark
Auto
place.
The flash light operates automatically and prevents the
Auto+Red
red-eye effect.
Fill in
The brightness of flash light is automatically controlled.
Always operates the flash light, and prevents the
Fill-in Red
red-eye effect.
Operates the flash light immediately after the opening
1st Curtain
of shutter
Operates the flash light just before the closing of
2nd Curtain
shutter
within the applicable range of flash.
(Refer to the Guide No in "Specification.")
flash for exclusive use by the NX-series model.
shooting modes.
] to pop up the flash.
45