12.
Bobbin case opener stroke
04.07
Requirement
When the bobbin case opener presses the bobbin case to the furthest extent, the
projection of the bobbin case must protrude 0.3 - 0.5 mm from the rear edge of the
needle plate recess.
Fig. 12 - 07
● Turn the handwheel until the bobbin case opener presses against the bobbin case to the
furthest extent.
● Move the bobbin case base ( screw 1, accessible from the rear of the post ) in
accordance with the requirement.
This setting can vary according to the thickness of the thread.
Adjustment
0,3 - 0,5 mm
1
12 - 9