RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT) The model and serial number of your new DVD player are located on the back of the DVD player cabinet. For your future convenience, we suggest that you record these numbers here: MODEL NO.____________________________...
3.5mm monotype plug so as to prevent false triggering of the amplifier due to electro-magnetic interference from nearby electronic equipment. The 12V-IN TRIGGER allows you to have an external 12V signal to turn ON the NAD S570 from standby.
Page 6
3.5mm monotype plug so as to prevent false triggering of the amplifier due to electro-magnetic interference from nearby electronic equipment. The 12V-IN TRIGGER allows you to have an external 12V signal to turn ON the NAD S570 from standby.
• The batteries should last about one year with normal use. OPERATION OF THE S 570 WITH THE REMOTE CONTROL This section shows you how to use the remote control. Point the remote control at the remote control sensor and press the buttons.
Identification of Controls REMOTE CONTROL 1 POWER ON, POWER OFF 2 SETUP 3 Transport control keys OPEN/CLOSE, STOP, PAUSE, STEP , PLAY, SKIP, SCAN , SLOW 4 ENTER and navigation buttons 5 RETURN 6 TITLE, MENU 7 DISPLAY 8 CLEAR 9 PROGRAM 10 REPEAT OF F...
1 The power buttons labeled ON and OFF will toggle the S570 from standby to ON position, only if the power button on the left front of the S570 is in the ON (depressed) state. 2 The SETUP button is used in conjunction with the television monitor’s On Screen Display (OSD) connected to the S570, (see the section on ‘Initial Set-up Settings’) to edit the DVD’s drop-down-menu OSD.
Press POWER. The S570-power indicator will become a bright blue. Press OPEN/CLOSE. The disc tray opens. • You can open the disc tray by pressing this button even if the DVD player is in standby mode. The Place a disc on the disc tray with the playback side down.
SCREEN SAVE The screen saver is useful to prevent your display from becoming damaged. The screen saver picture appears when you leave the S570 in pause or stop mode for about 8 minutes. AUTOMATIC POWER OFF FUNCTION The S570 can be powered to standby by the 12V-TRIGGER IN. Also, the S570 will automatically turn itself to standby mode after the Screen Saver has been engaged for about 8 minutes.
To return to normal playback, press PLAY NOTE The DVD player does not play back sound during the high-speed reverse and forward playback of DVD videodiscs. However, the S570 player plays back sound during fast forward or fast reverse playback of audio CDs.
DISPLAY/TITLES/MENUS/SUBTITLES Examples of GUI (Graphical User Interface) MENU Icons (The screens may differ depending on the disc contents.) OPERATION USING MENU ICONS Press DISPLAY during playback [TV screen] DVD GUI To show the current title number, press the DISPLAY button, and navigate to the desired title number or type in the numeric number directly and press ENTER.
Operation VIEWING FROM ANOTHER ANGLE Some DVDs may contain scenes, which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. (The recorded angles differ depending on the disc used.) 1 Press ANGLE during playback.
Storing a MARKER in the S570’s memory is similar to marking your page in a book. It allows you to quickly return to any point on the disc. 1 Press MARKER during play at the starting point to be viewed (listened to) again Indicates 1/9 is stored in the memory.
(Random playback) • Random playback may not be possible on certain discs. • If you press the SKIP button during random playback, the DVD player goes to another track randomly and starts playback.
1 Press AUDIO during play. 2 Press AUDIO repeatedly until the desired sound is selected. 1 Press AUDIO during play. 2 Press AUDIO repeatedly until the desired sound is selected. 1 Press AUDIO during play. Number of the audio soundtrack language being played back. 2 Press AUDIO repeatedly until the desired language (or encoding method, channel number) is selected.
You need to select from the OSD drop down menu, Audio, Analogue Off, and Auto, 96K or 48K. If uncertain, select Auto from the Analogue Off menu. Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of the DVD player to an AV decoder that has the Dolby Digital decoding function.
WARNING Do not set the Digital Audio Output of this DVD player to ‘Analogue Off’ unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers. (Refer to...
CONNECTING TO A SURROUND SOUND SYSTEM 2 CHANNEL DIGITAL STEREO SOUND You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).
WARNING Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output.
CONNECTING TO AN ANALOGUE STEREO SYSTEM Good quality sound of 2-Channel Stereo system can be achieved by connecting this DVD player to a receiver equipped with a two analogue audio inputs (right and left) and speaker system (right and left front speakers).
If one intends to connect to the S-VIDEO then slide the switch to S-VIDEO; if to the 21-pin SCART/RGB, then slide the switch to the SCART/RGB position. A 75-Ohm video and audio cables are supplied with the S570. SCART and S-Video cables can be purchased from your local NAD retailer. WARNING Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of this DVD player to a TV that is equipped with an AV decoder that has the Dolby Digital decoding function.
Setup INITIAL SETUP SETTINGS The player can always be operated under the same conditions (especially with DVD discs), once the initial settings have been completed. The settings will be retained in the memory until they are changed, even if the power is switched off. 1 Press SETUP in the stop or playback mode.
SELECTING VIDEO DISPLAY MODE To select the appropriate display mode according to your TV set, one selects the SETUP menu form the remote. Choose ‘Video’, ‘Display Mode’, then the three choices that best fit your TV set. 1 From the drop-down menu of the OSD screen, use the navigation arrows to select ‘Video’ and press ENTER on the remote.
Setup INITIAL SETUP SETTINGS SELECTING SIGNAL MODE To select the appropriate signal mode according to your TV set, one selects the SETUP menu form the remote. Choose ‘Video’, ‘Signal Mode’, then the three choices that best fit your TV set. 1 From the drop-down menu of the OSD screen, use the navigation arrows to select ‘Video’...
Region Management Information: This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc.
Enter the appropriate code number in the Settings’ drop-down-menu, ‘Other’ for “Audio”, “Subtitle”, “Menu” and/or “Text”. Be aware that this is a media specific feature that may not be available for all DVDs and VCDs. Code Language Code 6565 Afar 7079 6566 Abkhazian...
SYMPTOMS AND CORRECTION Check the following guide for the possible cause of a problem before contacting service. SYMPTOM No power The power is on, but the DVD player does not work No picture No sound The playback picture is poor...
Video DAC RGB-10 Bit (Built in one chip) Video output Composite Video S-Video (Y/C) Component Video (Y/Pr/Pb) Euro SCART with RGB & Composite Progressive scan (NTSC only) Digital Zoom x2,x4,x8,x16,x32, Still & Moving Picture TV Type Setup PAL / NTSC Audio DAC 192 KHz/24 Bit MPEG-2 Multi channel...
REGARDING YOUR TV SET COMPATIBILITY WITH THIS PRODUCT MODEL S570 DVD PLAYER, PLEASE CONTACT NAD ELECTRONICS INTERNATIONAL CUSTOMER SERVICE, +1 905 831 0799. It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission.