PAGE 32
ADVANCED OPERATION
Common procedures of initial settings
Once the initial settings have been completed, the
player can always be operated under the same
conditions (especially with DVD discs).
The settings will be retained in the memory until they
are changed, even if the power is switched off.
1
Press SET UP in the stop mode.
The SET UP menu is displayed.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
TV Mode
FLT Brightness
Audio Output
Speaker Output
2
Press
to select the desired item.
The screen will show the current setting for the
selected item.
Disc Audio
Disc Subtitle
Disc Menu
3
Press
to select the desired setting.
Rating
Some items require additional steps.
(See the relevant page.)
To exit SET UP menu
Press SET UP again or press RETURN.
(Return to the stop mode.)
English
English
English
Theatrical
Change
16:9 Wide
Auto
100%
Stream/PCM
Two Channel
English
English
English
Theatrical
SET UP Menu CLEAR
Before setting up the DVD player initially. it is advised
to restore the unit's default settings.
To set player to the factory default setting, follow
instructions below:
1
Open tray.
Press the buttons "CLEAR, 2, 5, 8, 0 and
2
CLEAR" in this exact sequence on the remote
control.
Be sure that the intervals between each press of
a button does not exceed 1 second.
3
The display will show:
Repeat 2 if "CFG INIT" isn't displayed.
4
The unit has now been set to factory default
settings. The SET UP menu looks like this:
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
TV Mode
FLT Brightness
Audio Output
Speaker Output
Center
The factory default password number is
5
"1, 2, 3, 4".
"CFG INIT".
English
English
English
Theatrical
Change
4:3 Letter Box
Auto
100%
Stream/PCM
Multichannel
Surround
Subwoofer