Step 2: Turning The Power On, And Setting The Date And Time - Sony DCR-SX40 Operating Manual

Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder is turned on.
• To turn on your camcorder when the LCD screen is open, press POWER.
, - - - - - - - - POWER
button
" I /
~~-it:I-O
/ I "
IOl
(Movie): To record movies
o
(Photo): To record photos
2
Select the desired geographical area with
EIJD,
then touch [NEXT].
Touch the button on the
LCD screen.
us
14
• To set the date and time again, touch
ft
(HOME) -
iiiIi
(SETTINGS) - [CLOCK/0LANG] -
[CLOCK SET]. When an item is not on the screen, touch
ElG
until the item appears.
3
Set lOST SET] or [SUMMERTIME], date and time, then touch
[@.
The clock starts.
• If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
• The date and time does not appear during recording, but they are automatically recorded on the
recording media, and can be displayed during playback. To display the date and time, touch
ft
(HOME)
- iiiIi
(SETTINGS) - [VIEW IMAGES SET] - [DATA CODE] - [DATE/TIME] - [QRJ -
L2J
-00.
• You can turn off the operation beeps by touching
ft
(HOME) - : (SETTINGS) - [SOUND/DISP
SET] - [BEEP] - [OFF] - [QK]
_1+=>1-
00.