Creating A Disc With One Touch (One Touch Disc Burn) - Sony DCR-SX40 Operating Manual

When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
• Other icons may appear.
• No icon may appear depending on the
installation procedure.
• The "Handycam Handbook" is not
installed in this procedure (p. 44).
You can save movies and photos on a disc
by simply pressing .~ (DISC BURN)
on your camcorder. Movies and photos
recorded on your camcorder that have not
yet been saved with One Touch Disc Burn
can be saved on a disc automatically.
• Install "PMB" beforehand (p. 24), however, do
not start "PMB:'
• Connect your camcorder to the wall outlet (wall
socket) using the AC Adaptor supplied for this
operation (p. 13).
• With
-@
(DISC BURN) on your camcorder,
you can save movies and photos recorded on
the internal memory only.
Creating a disc with
one touch
(One Touch Disc Burn)
6
PMB
GUid~
~
PMB
To disconnect your camcorder from the
computer
o
Click the
~
icon at the bottom
right of the desktop of the
computer - . [Safely remove USB
Mass Storage Device].
f)
Touch [END] - . [YES] on the
camcorder screen.
iii
Disconnect the USB cable.
1
Turn on your computer, and place
an empty disc on the DVD drive.
• See page 24 for the type of discs you can
use.
• If any other software than "PMB" starts
automatically, shut it down.
2
Turn on your camcorder, and
connect it to the computer using
the USB cable (supplied).
•
3
Press -@ (DISC BURN).
us
26