Table of Contents
Advertisement
2.0–4.0 mm
THROTTLE CABLE
[Page: 37, 38 Paragraph: 3, 4]
This motorcycle has a twin throttle cable system.
Cable A is for pulling cable and cable B is for return-
ing.
Check the throttle cable play at the throttle grip.
Throttle cable play: 2.0–4.0 mm
If adjustment is necessary, carry out the procedure
below:
1. Loosen the lock nut C of the throttle returning cable
and fully turn in the adjuster D.
2. Loosen the lock nut E of the throttle pulling cable.
3. Turn the adjuster F in or out until the correct play is
obtained.
4. Tighten the lock nut E while holding the adjuster F.
5. While holding the throttle grip at the fully closed
position, slowly turn out the adjuster D of the throt-
tle returning cable to feel resistance.
6. Tighten the lock nut C while holding the adjuster D.
After the adjustment is completed, check that
handlebar movement does not raise the engine
idle speed and that the throttle grip returns
smoothly and automatically.
MOTORCYCLE
Jul. 27, 2007
DATE:
7
14
PAGE:
OF
Hide quick links:
Advertisement
Table of Contents
