Electrolux ICON series Use & Care Manual page 8

8
Installation
To adjust the door stop:
Door stop is adjustable between 85 to 145 degrees.
NOTE
View shown is looking up at the bottom of the
refrigerator door.
Lower
Hinge
Min
Open
Max
Open
1 Open door to provide access to screw.
2 Loosen screw.
3 Adjust door to desired location.
Door to Desired
4 Rotate door stop until it makes contact with
the lower hinge.
Door
Stop
Screw
Adjustable Door Stop
Rotate
Location
Adjusting Door
5 Re-tighten screw.
Rotate
Door
Stop
Re-tighten Screw
6 Ensure door stops in desired location before
resuming normal use.
To level the doors using the adjustable lower hinge
(select models):
1 Remove all food items from door bins on door
being adjusted.
2 Open doors to 90 degrees.
3 Loosen or remove screw.
Loosen or Remove
Screw
Open
Door
90
Degrees
Bottom of Door
Loosen/Remove Screw (where applicable)
NOTE
Adjustable hinge should only be used after doors
have been leveled with rollers.
Re-tighten
Screw