Electrolux ICON series Use & Care Manual page 26

26
Care and Cleaning
Replacing LED Lights
Both the freezer and fresh food compartments of
your refrigerator include LED lights. Always use
Electrolux parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator's power cord.
2 Remove light cover by pushing up and out.
3 Hold the LED cover with one hand and pull the
connector with the other hand while pressing
the connector latch.
4 Replace LED light and snap in place assuring
the light is facing in toward the unit (inside
fresh food and freezer) or facing outward on
bottom of fresh food doors.
LED Light Harness Removal
(select models)
LED Light Removal
NOTE
LED lights are in series so if one is bad or
unplugged, several lights may not light up.
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online at
www.electroluxicon.com, or through the dealer where
you bought the refrigerator. Here is the product
number to request when ordering:
LED Light, Part #241891101
Incandescent Lights (40-watt bulb),
Part #5305514148