Switch The Phone On And Off; Standby Mode; Display - Nokia 6600 Slide User Manual

PUK (UPUK) and PUK2 (UPUK2) codes
•
may be supplied with the SIM (USIM)
card. If you enter the PIN code
incorrectly three times in succession,
you are asked for the PUK code. If the
codes are not supplied, contact your
service provider.
The security code helps to protect
•
your phone against unauthorised use.
You can create and change the code,
and set the phone to request the code.
Keep the code secret and in a safe
place separate from your phone. If
you forget the code and your phone is
locked, your phone will require
service and additional charges may
apply. For more information, contact
a Nokia Care point or your phone
dealer.
The barring password is required
•
when using the call barring service to
restrict calls to and from your phone
(network service).
To view or change the security
•
module settings for the web browser,
select Menu
Security Security module
>

Switch the phone on and off

To switch the phone on or off, press
•
and hold the power key.
If the phone prompts for a PIN code,
•
enter the code (displayed as ****).
If the phone prompts you for the time
•
and date, enter the local time, select
the time zone of your location in
terms of the time difference with
respect to Greenwich Mean Time
(GMT), and enter the date.
and time", p. 38.
© 2008 Nokia. All rights reserved.
Settings
> >
sett..
See "Date
Make it your phone
When you switch on your phone for the
first time, you may be prompted to get the
configuration settings from your service
provider (network service). For more
information, refer to
support. See "Configuration", p. 18, and
"Configuration setting

Standby mode

When the phone is ready for use, and you
have not entered any characters, the
phone is in the standby mode.

Display

1 Network type indicator and signal
strength of the cellular network
2 Battery charge status
3 Indicators
4 Name of the network or the operator
logo
5 Clock
6 Display
7 Function of the left selection key
8 Function of the scroll key
9 Function of the right selection key
You can change the function of the left and
right selection key.
selection keys", p. 14.
Connect to
service", p. 43.
See "Left and right
9
9