Positioning Belt - Pride QUANTUM 1650 Owner's Manual

Table of Contents

Advertisement

V . C O M F O R T A D J U S T M E N T S
To adjust the anti-tip wheels:
1. Place a spanner on the inner locknut of the anti-tip
bracket located in front of the shock strut. See figure
17.
2. Turn the locknut anticlockwise to loosen.
3. Place a spanner on the adjustable cam located on the
other side of the locknut. To adjust the anti-tip
upward, turn the cam anticlockwise. To adjust the
anti-tip downward, turn the cam clockwise.
4. Tighten the locknut.
5. Raise or lower the other anti-tip wheel so that it is at
the same height.

Positioning Belt

Your power chair may be equipped with a positioning
belt that can be adjusted for operator comfort. See figure
18. The positioning belt is designed to support the opera-
tor so that he/she does not slide down or forward in the
seat. The positioning belt is not designed for use as a
restraining device.
To install the positioning belt:
1. Remove the rearmost screw that holds the seat hinge
to the seat base on both the left and right seat hinges.
2. Insert the screw through the supplied washer, through
the positioning belt and into the seat base for each side
of the power chair seat.
3. Tighten both screws.
To adjust the positioning belt for operator comfort:
1. Once seated, insert the metal tab on one side of the
belt into the plastic housing on the opposite side until
you hear a click. See figure 18.
2. Pull the excess strap attached to the metal tab until it
is secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning
belt is properly secured to the power
chair and is adjusted for operator comfort
before each use.
MANDATORY! Inspect the positioning
belt for loose or damaged parts before
each use of the power chair. If you
discover
a
Quantum Rehab Dealer for maintenance
and repair.
28
problem,
contact
your
www.pridemobility.com
SHOCK STRUT
ADJUSTABLE CAM
Figure 17. Anti-Tip Wheel Assembly
Figure 18. Positioning Belt
INNER
LOCKNUT
Quantum 1650

Advertisement

Table of Contents
loading

Table of Contents