V. Comfort Adjustments - Pride QUANTUM 1650 Owner's Manual

V . C O M F O R T A D J U S T M E N T S
Heavy Duty Drop-in Armrests
The heavy duty drop-in armrests are attached to the
chair with an armrest locking mechanism that is fas-
tened to the side rails of the seat. These armrests can be
removed for easy transfer onto and off of the power
chair. The position of the armrest on the chair, as well
as the overall height of the armrest, can be adjusted.
To remove the armrest assembly:
1. Rotate the armrest lock lever rearward. See figure 11.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest lock.
See figure 11.
2. Rotate the armrest lock lever forward.
Armrest Position Adjustment
The position of the armrests along the side rails can be
adjusted forward or rearward.
To adjust the armrest position:
1. Remove the armrest from the armrest lock.
2. Loosen the flat head screws that fasten the armrest
lock to the seat base side rail. See figure 12.
3. Slide the armrest lock forward or rearward along
the seat base side rail.
4. Tighten the flat head screws.
5. Install the armrest in the armrest lock. See figure 12.
6. Repeat for the other side if necessary.
Armrest Height Adjustment
The height of the armrest can be adjusted by sliding the
armrest up or down the detent bar using the required tool.
To adjust the armrest height:
1. Rotate the armrest lock lever rearward and remove
the armrest from the armrest lock. See figure 11.
2. Remove the button head cap screws from the side
of the armrest. See figure 13.
3. Slide the armrest up or down the detent bar to the
desired height.
4. Reinstall the button head cap screws to the side of
the armrest.
5. Install the armrest in the armrest lock and rotate the
armrest lock lever forward.
6. If necessary, repeat for the other armrest.
Quantum 1650
Figure 12. Armrest Position Adjustment
Figure 13. Armrest Height Adjustment
www.pridemobility.com 25