Table of Contents
Advertisement
12-82
Simple inspection and service
Inspection
intervals
WARNING
•
The battery generates flammable hydro-
gen gas and should be kept away from
open flame and spark.
•
When removing the battery, always dis-
connect the negative (–) terminal first and
reconnect it last. A spark can occur if a
tool touches the positive (+) terminal and
frame with the negative (–) terminal con-
nected.
•
When handling the battery, wear safety
goggles to protect your eyes.
•
Perform all battery checks with the engine
turned off.
1 Removal and installation of battery
cover
1. Release the cover from the stopper
ing the part of the cover that is marked with an
arrow
2. Pull the cover toward you to release it from the
other stoppers
3. To fit the battery cover, perform these steps in
reverse. After fitting the cover, make sure it is
securely retained.
Z18864
Battery – check
At the time of pre-operational
check
in the illustration.
.
by press-
Advertisement
Table of Contents
