Sony XEL-1 Operating Instructions Manual page 33

x.v.Colour
Photo Colour Space
Auto Brightness
Control
Timer Settings
Set-up
Auto Start-up
Region
Displays moving pictures that is more faithful to the original source by matching
the colour space of source.
~
• The setting is fixed to "Normal" when the input signal is HDMI (RGB), even if
"x.v.Colour" is selected.
• Only available for HDMI 1/2 in format 720p, 1080i or 1080p.
Selects the option ("sRGB", "sYCC", "Adobe RGB") to match the output colour
space within the output signal from the equipment connected to the HDMI or USB.
~
• Select "sYCC" when using the equipment that supports "x.v.Colour".
• Only available for HDMI 1/2 in format 1080i or 1080p.
• Not available when "Colour Space" is set to "Wide" (page 31).
Adjusts the brightness of the image automatically when highly contrasting images
are displayed on the screen for a long period of time. The brightest elements on the
screen, such as the time indicator or the broadcast logo, will be less bright in order
to protect the screen from damage. Ghosting may occur in rare cases. Select one of
the options, "High", "Medium" or "Low", depending on the dimming level or the
ghosting level of the image. "Medium" is for standard use.
Sets the timer to turn on/off the TV.
Sleep Timer Sets a period of time after which the TV automatically
switches itself into standby mode.
When the "Sleep Timer" is activated, the
on the TV lights up in orange.
z
• If you switch off the TV and switch it on again, "Sleep
Timer" is reset to "Off".
• A notification message appears on the screen one minute
before the TV switches to standby mode.
On Timer When the "On Timer" is activated, the
Settings on the TV lights up in orange.
On Timer
Timer Mode
Time
Duration
Time Adjustment When digital channels have been received, set this to "Auto"
to adjust the clock automatically. If no digital channels have
been received, set this to "Manual", and adjust the clock
manually in "Clock Set".
Clock Set Allows you to adjust the clock manually.
You can run the initial set-up that appeared when you first connected the TV
(page 12), and select the region and tune in all available channels again.
Even if you have made the settings when you first connected the TV, you may need
to change the settings after moving house, or to search for newly launched
channels.
Sets the region in which you will operate the TV.
(Timer) indicator
(Timer) indicator
Sets the timer to turn on the TV from
standby mode.
Sets the desired day(s) of the week you
want the timer to turn on the TV.
Sets the time to turn on the TV.
Sets how long you want the TV to stay on
before switching to standby mode again.
(Continued)
33
GB