Start-Up Guide - Sony XEL-1 Operating Instructions Manual

Start-up Guide

Before Use
To check the accessories
Mains lead/AC power cord (Type O) (1)
Mains/AC adaptor AC-ED002 (1)
Remote RM-ED015 (1)
CR2032 (lithium) battery (1)
Cleaning cloth (1)
10
GB
To insert a battery into the remote
When using the remote for the first time
Pull the insulation film out from the remote.
When changing the battery
Unlock the battery holder by pushing a pen tip
into the hole located on the rear of the remote.
Slide the battery holder out. Replace the
battery with CR2032 (lithium) battery with e
side up in the battery holder of the remote.
Slide to open
~
• Observe the correct polarity when inserting the
battery.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.