How To Install The Wheels - Murray 425001x99A Instruction Book

HOW TO INSTALL THE WHEELS

If the wheels must be removed for service, make sure they are
installed as follows.
Front Wheel
1. Make sure the valve stem is to the outside of the tractor. Slide
the front wheel on the spindle (See Figure 38).
2. Fasten the front wheel with washer and cotter pin. Bend the
ends of the cotter pin apart to keep the front wheel on the
spindle.
3. If your model has hub caps, install the hub caps. Make sure
the washer hold the hub caps in place.
Rear Wheel
1. Install the washers and spacer onto the axle as shown in
Figure 39.
2. Mount the square key in the key slot (See Figure 39).
3. Make sure the valve stem is to the outside of the tractor. Align
the slot in the rear wheel with the square key. Slide the rear
wheel on the axle.
4. Fasten the rear wheel with washer and e-ring .
5. If your model has hub caps, install the hub caps. Make sure
the washer hold the hub caps in place.
F-050722L
MAINTENANCE
Hub Cap
Valve Stem
Hub Cap
E-Ring
33
Cotter Pin
Washer
Washer
Rear Wheel
Washer
Valve Stem
Spindle
Front Wheel
Figure 38
Square Key
Key Slot
Washer
Axle
Spacer
Figure 39