Corrosion Control Anode - Mercury 25 Jet 4-Stroke Manual

Assemble steering link rod to steering cable with flat washer and
nylon insert locknut. Tighten locknut until it seats, then back nut off
1/4 turn.
Assemble steering link rod to engine with bolt, locknut, spacer, and
flat washers. Torque locknut to specifications.
b
c
b
a
a - Bolt (10‑898101018)
b - Flat washer (12‑95392‑10)
c - Spacer (23‑853826001)
d - Nylon insert locknut (11‑16147‑‑3)
e - Install steering link rod into side hole
f - Nylon insert locknut (11‑16147‑‑3) (tighten until seats
then back off 1/4 turn)
Description
Nylon insert locknut "d"
Nylon insert locknut "f"

Corrosion Control Anode

Your outboard has corrosion control anodes at different locations.
An anode helps protect the outboard against galvanic corrosion by
sacrificing its metal to be slowly corroded instead of the outboard
metals.
MAINTENANCE
d
Tighten until seats, then back off ¼ turn
e
Nm lb. in.
27
80
b
f
9691
lb. ft.
20