Top Cowl Removal And Installation - Mercury 25 Jet 4-Stroke Manual

SELECTING ACCESSORIES FOR YOUR OUTBOARD
Genuine Mercury Precision or Quicksilver Accessories have been
specifically designed and tested for your outboard. These
accessories are available from Mercury Marine dealers.
Check with your dealer before installing accessories. The misuse
of approved accessories or the use of non‑approved accessories
can result in product failure, serious injury, or death.
Some accessories not manufactured or sold by Mercury Marine
are not designed to be safely used with your outboard or outboard
operating system. Acquire and read the installation, operation, and
maintenance manuals for all your selected accessories.
ELECTRIC FUEL PUMP
If an electric fuel pump is used, the fuel pressure must not exceed
27.58 kPa (4 PSI) at the engine. If necessary, install a pressure
regulator to regulate the pressure.

Top Cowl Removal And Installation

TOP COWL REMOVAL
1. Unlock the cowl latch located at the rear of the engine by lifting
the latch up.
2. Lift up on the rear of the cowl and disengage the front hook.
ENGINE INSTALLATION
WARNING
!
10170
100