Philips DVDR3590H Service Manual page 52

http://www.jdwxzlw.com/?fromuser=华盛维修
EN 52 5. 3139 785 32804
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
家电维修资料网，免费下载各种维修资料
Firmware Upgrading & Diagnostic Software
DS_SYS_VirginModeOff
1221
Turn off the virgin mode functionality (e.g. the auto channel search upon start-
up)
- Issue the command to reset the bit for the virgin mode to the analogue
board
Less than 1 second.
None
Number Description
122100 Turning off the virgin mode succeeded
122101 Turning off VirginMode on the Analogue Board failed.
122102 The returned error code from the analogue board is unknown:
122103 No DS error code known for analogue board error:
122104 There was no response from the analogue board.
122105 Section validation or write failed in NVRAM
122106 Reading the CONFIG section from NVRAM failed
122107 Initialisation of IIC or reaching NVRAM failed
DS:> 1221
122100:
Test OK @
DS_SYS_VirginModeGet
1222
Get the virgin mode functionality status (e.g. the auto channel search upon
start-up)
- Issue the command to reset the bit for the virgin mode to the analogue
board
Less than 1 second.
None
Number Description
122200 Getting the virgin mode succeeded
122201 Reading the Virgin Mode flag from NVRAM failed
122202 Initialisation of IIC or reaching the NVRAM failed
122203 Reading an unexpected version of the section in NVRAM
DS:> 1222
122200: The Virgin Mode functionality is: ON
Test OK @
DS_SYS_DisplayFatalOn
1223
Turn on the display-fatal functionality which displays debug-information on the
display when encountering a fatal error condition from which could not be
recovered automatically
- Issue the command to use the display-fatal functionality to the analogue
board
Less than 1 second.
None
Number Description
122300 Turning on the display-fatal functionality succeeded
122301 Turning on the display-fatal functionality failed
122302 The returned error code from the analogue board is unknown:
122303 No DS error code known for analogue board error:
122304 There was no response from the analogue board.
122305 Section validation or write failed in NVRAM
122306 Reading the section from NVRAM failed
122307 Initialisation of IIC or reaching NVRAM failed
DS:> 1223
122300:
Test OK @