Mazda 3 2016 Manual page 354

Interior Features
Bluetooth
®
Con rmation Prompts
The con rmation prompt con rms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned
on, the system reads out the voice
input command previously received
and con rms whether the command is
correct before advancing to the command
execution.
When the con rmation prompt function is
turned on:
(Ex. "Calling John's device. Is this
correct?")
When the con rmation prompt function is
turned off:
(Ex. "Calling John's device.")
NOTE
If the con rmation prompt function is
turned off when making an emergency
call, the system reads out and con rms the
command before executing it.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Setup"
3. Prompt: "Select one of the following:
Pairing options, con rmation prompts,
language, passcode, select phone or
select music player."
4. Say: [Beep] "Con rmation prompts"
5. Prompt: "Con rmation prompts
are on/off. Would you like to turn
con rmation prompts off/on?"
6. Say: [Beep] "Yes"
7. Prompt: "Con rmation prompts are
off/on."
5–92
Voice Recognition Learning
Function (Speaker Enrollment)
(Type A)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice. If the
recognition of the voice input commands
to the system is not adequate, this function
can largely improve the system's voice
recognition of the user. If your voice can
be recognized suf ciently without using
this function, you may not realize the
added bene t of the function. To register
your voice, the voice input command
list must be read out. Read out the list
when the vehicle is parked. Perform the
registration in as quiet a place as possible
(Page 5-89 ). The registration must be
performed completely. The required time
is a few minutes. The user needs to be
seated in the driver's seat with the voice
input command list for voice recognition
learning open to the page indicated below.
When voice recognition learning is done
for the rst time
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Voice training"
3. Prompt: "This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hang-up button to cancel at
any time."
4. Press the talk button with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. "Please read
phrase 1" )