Mazda 3 2016 Manual page 348

Interior Features
Bluetooth
®
NOTE
Some Bluetooth audio devices need a
®
certain amount of time before the
symbol is displayed.
If the pairing failed, " Err " ashes for
three seconds .
Pairing cannot be performed while
the vehicle is moving. If you attempt
to perform pairing while the vehicle is
moving, " PAIR DISABLE " is displayed.
If seven Bluetooth
®
already been paired to the vehicle,
pairing cannot be performed and
" MEMORY FULL " is displayed. Delete
one paired device to pair another one.
Pairing a Bluetooth ®
does not have a four-digit PIN code
1. Using the audio control dial, select
the pairing mode " PAIR DEVICE "
in the " BT SETUP " mode. (Refer to
"Bluetooth audio set up" for details.)
®
2. Press the audio control dial to
determine the mode. After " ENTER
PIN " is displayed on the audio display
for three seconds, " PIN 0000 " is
displayed and the PIN code can be
input.
3. Press the audio control dial while " PIN
0000 " is displayed. " PAIRING " ashes
on the audio display.
4. Operate the Bluetooth
and set it to the pairing mode while
" PAIRING " is ashing.
5. As the Bluetooth
®
requires a PIN code, input "0000".
6. When the pairing is completed,
" PAIR SUCCESS " are displayed after
about 10-30 seconds, after which
" PAIR SUCCESS " continues to be
displayed for three seconds, and then
the unit returns to the normal display.
5–86
audio devices have
audio device which
® audio device
audio device
and
NOTE
If pairing cannot be completed, try
"1234" instead. Refer to the owner's
manual of your mobile device for the
right PIN code.
Some Bluetooth audio devices need a
®
certain amount of time before the
symbol is displayed.
If the pairing failed, " Err " ashes for
three seconds.
Pairing cannot be performed while
the vehicle is moving. If you attempt
to perform pairing while the vehicle is
moving, " PAIR DISABLE " is displayed.
If seven Bluetooth
®
already been paired to the vehicle,
pairing cannot be performed and
" MEMORY FULL " is displayed. Delete
one paired device to pair another one.
Device selection
If several devices have been paired, the
Bluetooth unit links the device last
®
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the
link change mode " LINK CHANGE "
in the " BT SETUP " mode. (Refer to
"Bluetooth ® audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
Bluetooth audio device is displayed.
®
If no Bluetooth audio device is
®
currently linked, the name of the rst
device among the paired devices is
displayed.
audio devices have