Mazda 3-sport 2016 Manual page 456

Maintenance and Care
Owner Maintenance
Fog lights
*
1. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the left, and turn off engine.
If you are changing the left bulb, turn
the steering wheel to the right, and turn
off engine.
2. Make sure the fog light switch is off.
3. Pull the center of each plastic retainer
and remove the retainers.
4. Turn the screw counterclockwise and
remove it, and then partially peel back
the mudguard.
6–52
*Some models.
Mazda3_8FA4-EA-15G_Edition2.indb 52 Mazda3_8FA4-EA-15G_Edition2.indb 52
Removal
Installation
5. Disconnect the connector from the unit
by pressing the tab on the connector
with your nger and pulling the
connector downward.
6. Turn the socket and bulb assembly
to remove it. Carefully remove the
bulb from its socket in the re ector by
gently pulling it straight backward out
of the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
2015/07/16 8:46:41 2015/07/16 8:46:41