Connecting The Unit To A Wireless Network - Yamaha RX-V781 Owner's Manual

Connecting the unit to a wireless network

There are several methods to connect the unit to a wireless network.
z
Select a connection method according to your environment.
• Using MusicCast CONTROLLER (p.61)
• Sharing the iOS device setting (p.54)
• Using the WPS push button configuration (p.55)
• Using other connection methods (p.56)
⬛
Sharing the iOS device setting
You can easily set up a wireless connection by applying the connection
settings on iOS devices (iPhone/iPad/iPod touch).
Before proceeding, confirm that your iOS device is connected to a
ON SCREEN
wireless router.
Y
Cursor keys
ENTER
If you set up a wireless connection with this method, the following settings will be
initialized.
– Network settings
– Bluetooth settings
– USB and network items registered as shortcuts
– Internet radio stations register to "Bookmarks"
– Account information for the network services
X
• You need iOS device with iOS 7 or later. (The following procedure is a setup example
for iOS 8.)
• This configuration does not work if the security method of your wireless router
(access point) is WEP. In this case, use other connection method.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video
from the unit (HDMI OUT jack).
Y
Operations with TV screen are available only when your TV is connected to the
unit via HDMI.
3
Press ON SCREEN.
4
Use the Cursor keys to select "Setup" and press ENTER.
5
Use the Cursor keys (e/r) to select "Network".
6
Use the Cursor keys (q/w) to select "Network
Connection" and press ENTER.
7
Use the Cursor keys (q/w) and ENTER to check "Wireless
(Wi-Fi)" and select "OK".
X
The checkmark indicates the current setting.
8
Use the Cursor keys (q/w) and ENTER to check "Share
Wi-Fi Settings (iOS)" and select "NEXT".
54
En