VTech VC7151 User Manual page 43

Edit numbers for remote calls:
You can add, edit, or delete a telephone number for remote
calls.
MODE
1. Press on the handset or telephone base when idle.
on the handset, or CALLER ID / or
2. Press or
PHONEBOOK /
on the telephone base to scroll to choose Remote, and
then press OPTIONS.
SELECT
3. Press
on the handset, or CALLER ID / or
4. Press or
PHONEBOOK /
on the telephone base to scroll to the desired slots (1, 2, or 3), and then press
SELECT.
5. Use the dialing keys to enter the number.
6. Press SAVE to save.
Set time delay for remote calls:
You can choose to set an exit or entrance delay time for the
remote calls, so that when a sensor is triggered when you
exit or enter your home within the delay time, you will not
receive the unnecessary remote call.
For example, when you are about to leave home, you can set
the exit delay time to 5 minutes. Once the delay is set, you
will not receive a remote call even when you open the door
within those five minutes.
As for the entrance delay time, if you set it
to 1 minute, you will receive the remote call a minute after
opening the door as you come home, unless you press
Local mode, or press DISARM on the handset or telephone base within that
minute.
If you want to be notified immediately whenever a door is opened,
we recommend you to set it as 0 minutes.
to select Set tel number.
MODE
35
and then choose