Clarion db155 Owner's Manual page 11

Compact disc cannot Another compact disc is al- Eject the compact disc before loading the new
be loaded. ready loaded. one.
Water droplets may form on Let dry for about
1
hour with the power on.
the internal lens when the
car is parked in a humid
place.
Reset button
Consult your store of purchase.
Replace with a compact disc with no scratches.
Clean the compact disc with a soft cloth.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
Incorrect wiring.
Compact disc is heavily
scratched or warped.
The microprocessor has Turn off the power, then
malfunctioned due to noise, press the [RELEASE]
etc. button and remove the
DCP.
Press the reset button for
about 2 seconds with a
thin rod.
Compact disc is dirty.
DCP or main unit connec-
tors are dirty.
Power does not turn
on.
(No sound is pro-
duced.)
Nothing happens
when buttons are
pressed.
Display is not accu-
rate.
Sound is bad directly
after power is turned
on.
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
A CD cannot be played due to scratches, Replace with a non-scratched,
etc. non-warped-disc.
ERROR 3
A CD is caught inside the CD deck and is
not ejected.
This is a failure of CD deck s mechanism
and consult your store of purchase.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
12
08155