Table of Contents
Advertisement
:
At end of dial
command
;
At end of dial
command
!
In dial
command
@
In dial
command
$
In dial
command
+++AT<CR>
<BREAK>AT<CR>
%%%AT<CR>
Continuous Redial
Colon; causes continuous redial of number until answered (10 in North American
models). Not used in U.K. or International models.
Return to Command Mode After Dialing
Semi-colon; causes immediate return to command mode after dialing.
Flash On-Hook
Exclamation; causes modem to flash on-hook.
Quiet Answer
Causes modem to wait for a ringback, then 5 seconds of silence before processing
next part of command.
Call Card Tone Detect
Causes modem to wait for a call card tone before processing next part of command.
Escape Sequence
Puts modem in command mode while still remaining on line. Type +++ followed by the
letters A and T, up to ten command characters (or as defined by S34 ), and a
RETURN.
Break Escape Sequence
Alternate escape method. Puts modem in command mode while still remaining on line.
Enter break signal followed by the letters A and T, up to sixty command characters,
and a RETURN.
Remote Configuration Escape Sequence
Cause remote modem to display remote configuration menu. Type %%% (or as
defined in register S13) followed by the letters A and T, and a RETURN.
Appendix
105
Advertisement
Table of Contents
