Table of Contents
Advertisement
Chapter 5 – CallFinder Server
Front Panel LEDs
Label
Name
Identifier
General LEDs
Power
Status
Line 1 LED
TD
Transmit Data
RD
Receive Data
TR
Terminal Ready
DID
DID
Line 2 LEDs
TD
Transmit Data
RD
Receive Data
TR
Terminal Ready
DID
DID
Ethernet LEDs
ACT
Activity
LINK
Data Link
SPEED
Data Rate
Updating CallFinder Firmware
Successive editions of CallFinder firmware will be issued over time. There are two kinds of CallFinder
firmware: (1) server firmware, and (2) firmware used by the DID-channel modems. When issued, such
updated firmware files will be accessible on the MultiTech web site. However, updating is done by the
FaxFinder/CallFinder Manager software. To install updated firmware, see "Updating Firmware" in
Chapter 7: FFCF Manager Operation.
Multi-Tech Systems, Inc.
Operation
Description
On if unit is on.
Flashing Green = unit is functioning properly
Solid Red = unit is having its software updated. DO NOT
TURN OFF if Status LED is solid red.
Off = system is booting or power is off
Presents status of Channel 1.
Channel 1 is being configured.
Channel 1 is reporting.
When lit, channel 2 is ready to receive a call.
Lit when DTR to DID modem is high.
The telco central office is drawing power from the DID line
which means that a call is in progress.
Presents status of channel 2.
Channel 2 is being configured.
Channel 2 is reporting.
When lit, channel 2 is ready to receive a call.
Lit when DTR to DID modem is high.
The telco central office is drawing power from the DID line
which means that a call is in progress.
Lit when packets are being transmitted by any device on the
Ethernet network (not necessarily by the CallFinder).
Lit when a physical link has been established with the
Ethernet network.
Indicates speed of Ethernet connection. If lit, data rate is 100
Mb/sec; if not lit, data rate is 10 Mb/sec.
CF220 CallFinder User Guide
Chapter 4: CallFinder Server Operation
47
Advertisement
Table of Contents
