Table of Contents
Advertisement
12. Changing Administrator's Password for CallFinder SW
a. In the Password Administration screen, enter a new User ID and Password for the CallFinder
Administrator (something other than "admin" and "admin"). This User ID and password are used to
give the administrator access to the CallFinder's built-in software. Re-enter the password in the
"Confirm Password" field. Passwords can be as short as 1 character, as long as 40 characters, and
are case-sensitive.
b. Click Update for this row. The Login screen will appear.
13. Assigning DID Numbers to PBX Users (Extensions)
a. In the Phone Book screen just below the entries for the CallFinder administrator, make phonebook
entries for the other persons in your office to whom DID numbers have been assigned.
For each such DID user, enter the name, DID number (the digits that the DID line will be sending to
the CallFinder to reach this user), and PBX extension (the number that the CallFinder must dial on
the PBX to reach the user) in the appropriate fields.
b. Click on Add for each row completed. The message "Success: [name] was updated" will appear
above the Phone Book list.
Multi-Tech Systems, Inc.
Chapter 3: CallFinder Server Installation
CF220 CallFinder User Guide
33
Advertisement
Table of Contents
