E N G L I S H CORDLESS DRILL/DRIVER DC727KA/DC728/DC729/DC756/DC757/DC759 Congratulations! You have chosen a D WALT power tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users.
EC-Declaration of Conformity The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DC727KA/DC728/DC729/DC756/DC757/DC759 DANGER: Indicates an imminently WALT declares that these products described hazardous situation which, if not avoided, under “technical data”...
E N G L I S H 3) PERSONAL SAFETY WARNING: To reduce the risk of injury, Stay alert, watch what you are doing and read the instruction manual. use common sense when operating a General Power Tool Safety Warnings power tool.
E N G L I S H Store idle power tools out of the reach Additional Specifi c Safety Rules of children and do not allow persons for Drills unfamiliar with the power tool or these • Wear ear protectors. Exposure to noise can instructions to operate the power tool.
E N G L I S H DATE CODE POSITION • Pull by plug rather than cord when disconnecting charger. This will reduce risk The Date Code, which also includes the year of of damage to electric plug and cord. manufacture, is printed into the housing surface that forms the mounting joint between tool and battery.
E N G L I S H 1. Plug the charger (11) into an appropriate outlet Important Safety Instructions for All before inserting battery pack. Battery Packs 2. Insert the battery pack into the charger. The red When ordering replacement battery packs, be sure to (charging) light will blink continuously indicating include catalog number and voltage.
E N G L I S H The DC727KA and DC756 operate on 12 volt battery However, if the outer seal is broken: packs (NiCd, NiMH). a. and the battery liquid gets on your skin, immediately wash with soap and water for Storage Recommendations several minutes.
• Connect the blue lead to the neutral terminal. INTENDED USE WARNING: No connection is to be made Your cordless drill/driver DC727KA/DC728/DC729/ to the earth terminal. DC756/DC757/DC759 has been designed for professional drilling and screwdriving applications. Follow the fitting instructions supplied with good quality plugs.
E N G L I S H • Use only D WALT battery packs and 1 low speed/high torque chargers. (drilling large holes, driving screws) 2 high speed/low torque Inserting and Removing the (drilling smaller holes) Battery Pack from the Tool (fi g. A) For speed rates, refer to the technical data.
E N G L I S H Screwdriving (fi g. A) WARNING: Never use solvents or other harsh chemicals for cleaning the non- • Select forward or reverse rotation using the metallic parts of the tool. These chemicals slider (2). may weaken the materials used in these •...
E N G L I S H GUARANTEE WALT provides a facility for the collection and recycling of D WALT products once they have reached the end of their working life. To take WALT is confident of the quality of its advantage of this service please return your product products and offers an outstanding guarantee to any authorised repair agent who will collect them...
Page 20
Black & Decker - D WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk...