SETTING UP YOUR BABY MONITOR Setting up your Baby Monitor for the first time Your KODAK Baby Monitoring System is ready to go right out of the box. Simply plug in the power adaptors of the Parent Unit and Base Unit, and power them on.
USING YOUR BABY MONITOR Monitoring your child Changing the volume on your Base Place the Base Unit in the room where you Unit want to monitor your child. Make sure the Use the volume up and volume down Base Unit is powered on. buttons on the side of the Base Unit to control the volume.
Camera to release new features or fix a firmware update. existing bugs. Note: Your KODAK Baby Monitoring 1. Power on your base unit, parent unit, and System will go offline for up to 10 Camera. Make sure the base unit and minutes, while the upgrade takes place.
MISPLACING YOUR PARENT UNIT In the case that you misplaced your Parent Your Parent Unit will emit a chime. Once you Unit somewhere in your house, you can locate your Parent Unit, tap the top blinking page the Parent Unit with your Base Unit. light to turn off...