Safety Buzzer - Panasonic W61P User Manual

Safety Buzzer

Setting Safety Buzzer allows you to use W61P
as high volume emergency buzzer by holding
0
down for about one second while the
standby screen is displayed.
To turn on Safety Buzzer
■
While the standby screen is displayed, press c532 ,
and press 1 (ON). Input the lock No., and press c (OK).
To stop Safety Buzzer
■
To stop Safety Buzzer, input the lock No., and press c (OK).
※ You cannot turn off W61P or perform any other operation while the Safety
Buzzer is sounding. The Safety Buzzer will continue to sound until you input
the lock No. or the battery fully discharges.
While connected with Matsushita round-type earphone jack conversion
◎
adaptor 02 and stereo earphone MDR-E0921 by SONY/fl at-type stereo
earphone-microphone with switch (option)/fl at-type stereo earphone-
microphone (option), Safety Buzzer sounds through W61P speaker.
Even with Manner Mode set, Safety Buzzer Sounds.
◎
85