Glass Frame Removal And Installation - Travis Industries DVL GSR2 NB Owner's Manual

22

Glass Frame Removal and Installation

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for
this appliance.
The appliance must be completely cool before removing the glass.
Do not strike or slam the glass.
Open the four latches holding the glass
a
frame in place (start with the two below
the glass) - follow the directions shown
to the right.
Glass Frame
Lift the glass frame up
b
and pull it forward to
remove. NOTE:
You may need to lift the
glass frame while re-
attaching.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
© Travis Industries
Finalizing the Installation
NOTE:
Replace the cove
covers for those faces
using them.
4140813
Top of
Firebox
Glass
Latch
Push in on
the latch.
Twist 1/4 turn.
The latch will then
disengage from the
latch bracket.
100-01294