Sony NWZ-A815 Operation Manual page 69

Setting a Scr ensav r Type
You can set the screensaver to either a «Clock» or «Blank» for when there is no
operation for a while during song playback. You can also select «None» for no
screensaver.
Settings
Press and hold the BACK/HOME button until the Home menu appears.
Press the ~/\l/<J/r> button to select ~ (Settings), and then press
the
[>UU
button to confirm.
Press the
~/\l/<J/r>
button to select IICommon Settings:' and then
press the
[>UU
button to confirm.
The list of «Common Settings» appears.
o
Press the ~rv /<J/r> button to select "Screensaver:' and then press
the
[>UU
button to confirm.
o
Press the ~/\l/<J/r> button to select "Type:' and then press the
l>DD
button to confirm.
The list of screensaver type appears.
Q
Press the ~/\l/<J/r> button to select a desired type, and then press
the
[>UU
button to confirm.
After confirming, the screen in step
0
appears again.
• Clock: When there is no operation for a while, a clock appears as a
screensaver. (Default setting)
• Blank: When there is no operation for a while, the screen goes off.
• None: The screen does not change to a screensaver.
Hint
• While characters are scrolling on the screen, the screen does not change to the
screensaver.