Automatic Transmission Controls - Mazda rx-8 2005 Manual

Hide thumbs Also See for rx-8 2005:
Table of Contents

Advertisement

Driving Your Mazda
Starting and Driving
Various Lockouts:
qTransmission Ranges
The shift lever must be in P or N to
operate the starter.
P (Park)
P locks the transmission and prevents the
rear wheels from rotating.
WARNING
Holding the Vehicle with P:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is dangerous.
If P fails to hold, the vehicle could
move and cause an accident. To hold
the vehicle, set the shift lever to P AND
set the parking brake.
5-10

Automatic Transmission Controls

Indicates that you must depress the brake pedal to shift (The ignition
switch must be in the ACC or ON position).
Indicates the shift lever can be shifted freely into any position.
CAUTION
Shifting into P, N or R while the
l
vehicle is moving can damage your
transmission.
Shifting into a driving gear or
l
reverse when the engine is running
faster than idle can damage the
transmission.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-8).

Advertisement

Table of Contents
loading

Table of Contents