Network Deployment - Vivotek FE8172 Quick Installation Manual

4

Network Deployment

General Connection (without PoE)
1. Connect RJ45 Ethernet cable to a switch.
2. Connect the power cable from the Network Camera to a power outlet.
3. If you have external devices such as sensors and alarms, make the connection from the general
I/O terminal block.
NOTE:
If DC power is preferred, it should comply with: O/P:
12VDC, 1.5Amin., L.P.S. per IEC 60950-1.
1
3
+3V3: Power, 3.3V DC
+3V3
DO: Digital Output
DO
D I: Digital Input
D1
GND: Ground
GND
General I/O Terminal Block
Power Cord Socket (Black)
Microphone In (Pink)
Audio Out (Green)
EN - 7
2