Call Interrupt; Dtmf; Receiving And Replying To Messages; Downloading Messages - Mazda CX-5 2015 Owner's Manual

Interior Features
Bluetooth®
qCall interrupt
A call can be interrupted to receive an
incoming call from a third party.
To switch to a new incoming call.
Touch the on-screen button or press
the pick-up button on the steering wheel.
NOTE
After receiving a new incoming call, the
l
previous call is placed on hold.
Touch the on-screen button or press
l
the hang-up button on the steering wheel to
refuse a call.
Switching between calls
Touch the on-screen button or
press the pick-up button on the steering
wheel.
Three-way call function
Touch the on-screen button.
qDTMF (Dual Tone Multi-
Frequency Signal) Transmission
This function is used when transmitting
DTMF via the Numerical Keypad. The
receiver of a DTMF transmission is
generally a home telephone answering
machine or a company's automated
guidance call center.
1. Touch the
after connecting to a home device or
service to display the tone transmission
screen.
2. Input the number using a numerical
keypad.
NOTE
If the DTMF code has two or more digits or
symbols, each one must be transmitted
individually.
5-88
on-screen button
qReceiving and Replying to
Messages (only MAP 1.0)
SMS (Short Message Service) messages,
MMS (Multimedia Messaging Service)
messages, and E-mail received by
connected devices can be downloaded,
displayed, and played (read by the
system).
Additionally, replies can also be made to
calls and messages in the received
messages.

Downloading messages

Up to 15 new messages can be
downloaded and displayed from a
connected device.
1. Touch the
2. Touch the
NOTE
Messages that have not been read are
l
downloaded first.
Attached data is not downloaded.
l
Messages up to 160-bytes can be
l
downloaded.
A message list is created for each device.
l
If there are unread messages, the receive
l
icon is displayed.
If the connected device does not correspond
l
to MAP 1.0, the AT command is used to
download. The downloaded message
indicates that it is already read.
Downloading using the AT command may
l
not function depending on the connected
device.
Receiving messages
When a device receives a message, a
message received notification is
displayed.
When the
is touched, the message is downloaded.
on-screen tab.
on-screen button.
on-screen button