Still Image Mode Switching - Sony FDR-X1000V How To Use Manual

[38] How to use

Still image mode switching

You can set the mode for still image recording.
1. Press the NEXT button or PREV button to select [SETUP] - [DRIVE], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
SINGL: Single shooting (Image size/5.4M)
Shoots a single still image.
BURST: Burst shooting (Image size/5.4M)
Shoots at the continuous shooting interval set in the still image shooting interval
[FPS].
MSHOT: Motion Shot LE (Image size/2.2M)
Generates a still image from still images continuously shot at the interval set in the
still image shooting interval [FPS].
BACK: Returns to the [DRIVE] menu.
To shoot successfully in Motion Shot LE mode
Try the following shooting methods.
Stabilize the camera to prevent camera shake.
Use the remote control function with a smartphone or Live-View Remote, or the self-timer
function to prevent camera shake for better results.
Make sure that the moving objects are not too large or too many.
Changing the Settings Shooting settings