Service Hints; Factory Mode Adjustment (Tc-14Rm12Lp, Lp • / Tc-20Rm12Lp, Lp • /Tc-20Ra12Lp, Lp • ) - Panasonic TC-14RM12L P Service Manual

SERVICE HINTS

SERVICE POSITION FOR E-BOARD
1. Remove the back cover.
2. Stand the TV set as shown in Fig. 2.
3. Remove the A-Board from the TV set by pulling the main board out as shown in Figure 2.
FACTORY MODE ADJUSTMENT (TC-14RM12LP, LP • / TC-20RM12LP, LP • /TC-20RA12LP, LP • )
HOW TO ENTER IN THE GP41 SERVICE MODE:
à
TO ENTER IN THE SERVICE MODE 1:
1. Adjust "OFF TIMER" to 30 minutes.
Press simultaneously "VOLUME (–)" on the front panel and "RECALL" on the remote control to enter "SERVICE MODE-1".
à
TO ENTER IN THE SERVICE MODE 2:
1. Enter in the "SERVICE MODE
2. Press the "1" channel key to enter
à
TO ENTER IN THE SERVICE MODE 3:
1. Enter in the "SERVICE MODE
2. Press the "1" channel key to enter
Note: Always, finishing the adjustments, press the "NORMAL" key or the "POWER" key in the remote control to exit the
service mode and return to TV normal way.
Pull out this way
1".
"SERVICE MODE 2".
2".
"SERVICE MODE 3".
TC-14RM12LP/TC-14RM12LP(.)/ TC-20RA12LP/TC-20RA12LP(.)/TC-20RM12LP/TC-20RM12LP(.)
Main Board
Fig. 2
- 9 -