2 Service Hints
2.1.
Service Position for E-Board
1. Remove the back cover.
2. Stand the TV set as shown in Fig. 2.
3. Remove the A-Board from the TV set by pulling the main board out as shown in Figure 2.
2.2.
Factory Mode Adjustment
1. Factory Mode Adjustment.
a) Set timer ON
b) Press remote's RECALL (
2. To Set Self-Check:
Press the volume down button on TV then press the Off Timer Button on remote control.
3. Service Mode 1 Controls
4. Service Mode 1 Function
5. Service Mode 2 Controls
To enter SERVICE 2; press channel key '1' in SERVICE 1 entry screen.
Fig. 2
) and panel's volume down key simultaneously to enter SERVICE 1.
5
TC-21FX20P