Features; Assembly - Ryobi BG828 Operator's Manual

PRODUCT SPECIFICATIONS
Wheel Diameter ........................................................... 8 in.
Wheel Thickness ......................................................... 1 in.
Arbor Hole ................................................................ 5/8 in.
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.

FEATURES

No Load Speed ..................................... 3600 r/min. (RPM)
Input ...............................120 V, AC only, 60 Hz, 3.0 Amps

ASSEMBLY

WARNING:
Always disconnect the bench grinder from the power
source before performing any assembly. Failure to do so
could result in accidental starting resulting in possible
serious personal injury.
TOOLS NEEDED
See Figure 2, page 11.
The following tools (not included or drawn to scale) are
needed for assembly:
 Adjustable Wrench
 Phillips Screwdriver
LOOSE PARTS LIST
See Figure 3, page 12.
The following items are included with the tool:
Screw ......................................................................... 4

Washer ....................................................................... 4

Lock washer ............................................................... 4

 Spark shield, left ........................................................ 1
Spark shield with magnifier, right ............................... 1

Spark deflector with LED assembly ........................... 2

Work rest knob ........................................................... 2

Flat washer ................................................................. 2

Lock washer ............................................................... 2

Work rest bracket ....................................................... 2

Bracket knob .............................................................. 2

Star washer ................................................................ 2

 Washer ....................................................................... 2
Work rest, left ............................................................. 1

Work rest, right ........................................................... 1

Coolant tray ................................................................ 1

 Batteries (AAA) ........................................................... 4
7 – English