Installation - Travis Industries GreenSmart SKU 99300699 (NG) Instalation Instructions

Installation

WARNING: Make sure power to the fireplace has been shut off prior to installation.
NOTE: The installation pictures show a 564. Installation on other models is
similar, take care to prevent any hot or moving parts from contacting any
wiring.
1 Remove the concealment cover (if applicable - see Figure 1).
2 Unscrew the four screws holding the control cover in place (see Figure 2). Carefully remove the
control cover (see Figure 3)
3 Unplug the ac adapter from the receptacle (see Figure 4). You can leave the ac adapter plugged
into the wiring harness.
Page 3 of 15
GreenSmart™ Remote – Export Version
SKU 99300699 (NG)
Figure 2
9/25/09 - 17601590
SKU 99300698 (LP)
Figure 1
Figure 3
Figure 4
© Travis Industries, Inc.